Pages with Sensative Information is Secure with SSL Certificate Authority

Here is detailed instructions on how to set up your Clock

(Chalet style (A) or Hunters Style (B)):

Clock (note: Hunters Style clocks (B) have top carvings and any other top part

attachmentssuch as deer head and antlers

Pendulum

Weights (without music = 2 weights, with music = 3 weights)

Instruction leaflet including warranty and service instructions

Carefully remove the clock from the carton by holding the frame.

Do not pull the figurines or other decorative attachments!

1. Open the latches on the back panel.

2. Remove the panel.

3. Pull out the wire clamps from each of the two bellows

Do not blend any of the movement wore connections!

4. Carefully remove the cardboard under the strike gong.

5. Check that the extension for the pendulum is going through the slot in the case.

6. Put back to back panel and close the latches.

7. Fix the deer head on the attachment and mount it onto the front of the roof of the clock (Hunters Style Clocks B only)

8. Select a place for your clock (approx. 1.8-2m / 6-7 feet above the floor).

Use a strong screw with a rawl plug and fix with small angle into the wall. Position it far enough from the wall to secure the clock properly. Make sure that the clock is hanging horizontally straight and flush on the wall to make sure the pendulum will not touch the case! The clock must be straight in a perpendicular way.